Surround Sound With HDMI

11 07 2011

So, I am working with a Dell XPS 1640 laptop. ATI Mobility Radeon HD 3670… and I wanted to connect this to an Onkyo receiver to get 5.1 sound through an HDMI cable. If you have a similar necessity, read on to learn how I managed to get things working.
The first thing I tried after following many forums was to update my drivers. Running Win7 x64, the official Dell drivers are quite old. Oh, BTW, HDMI is from the graphics card, so its the ATI driver that you need to update. This also means that the graphics card handles the audio out.. so no, the sound driver may be different and may not play a role. I tried updating with both the old Dell website version and the latest drivers from ATI. But, when I go to Control Panel>Sound and look at properties of the HDMI connection, I see only stereo. (PS: you may need to connect your laptop with a HDMI cable to something before the properties and stuff get activated). Bing told me through the official ATI MOBILITY Radeon webpage that the card supports Stereo in general, but 5.1 only for AC3 encoded files that use DTS or Dolby…. hmmmm…. Well, as a good step, after installing the latest ATI drivers, I installed Realtek HDMI audio drivers. No, I dont see Realtek listed as a manufacturer anywhere, but lots of people used it and hey, it works. So just do it.

Interestingly, although a simple surround sound test file only played in stereo (i.e. the rear left speaker stuff is output on the front left… and the center speaker is heard on both the front left and right), a file that had AC3 DTS sound played just fine in 5.1 stereo…. OK, so what this means is that unlike regular analog audio cables – where the final signal is simply sound waves for vibrating a carbon diaphragm, HDMI actually carries ENCODED data… heck AC3 directly even!! The receiver/amplifier decodes this stuff. Of course, the HDMI cable can also carry uncompressed PCM (Pulse Code Modulation) data – and if it does so, then decoding for audio in this case was carried out in software – which looked at the stereo capability and gave only two channels.

Cool! So the first solution was to simply convert a few files I had to AC3 DTS. (Coz another file with just AC3 worked in stereo only). Problem? VirtualDub and VirtualDubMod were troublesome. Moreover, I did not want to spend a loooong time decoding/encoding again. Then the nicest thing happened. Well, lots of nice things, but here’s what finally worked.

What we want to do is output ALL audio as AC3 onto the HDMI. That way, there is no stereo conversion, all the 5.1 or higher data is sent in encoded format to the receiver – which then does whatever you paid for it to do. So, install Klite Mega Codec pack (I used x86 on an x64 machine). Now, by default, all audio decoding happens with ffdshow audio decoder. So open the options for that. And in Output, (Output format for uncompressed or decoded streams), enable AC3. THATS IT! Of course, select to directly pass-through all that DTS, Dolby etc stuff.

In your Onkyo receiver, if its shows you PCM as the incoming data stream, it should switch to Dolby or DTS now when you actually play a file. In my case, AAC was still in stereo through Windows Media Player, but Media Player Classic worked fine for everything. No other tweaks. No adding output filters as AC3Filter… nothing. 🙂

PS: Another solution – that is not as invasive as installing the entire klite codec pack – is to simply install AC3Filter from That thing claims to be able to output any sound from your computer in AC3 format. But you may have to do some extra stuff (Like add it as a post-processing renderer in your media player etc)